Get in Touch







    Need a hand? Give us a call on +44(0)1923 691500

    Used Citizen A32-VII 7 Axis CNC Sliding Headstock Turning Centre

    Rent from
    £3,500
    Serial Number: V14072
    Year of Manufacture: 2008
    First Installed: January 2009

    Accessories:
    Iemca Boss 332/37 Magazine Barfeed
    Swarf Conveyor
    Workpiece Conveyor
    Coolblaster 5-line High Pressure Coolant System
    Absolent Fume Extractor
    Fire Extinguisher

    L320-XII B5 LFV

    Cincom’s best-selling L series machines have been relaunched with exciting new functions.

    The L20 XIIB5 finally enables simultaneous 5-axis control, greatly expanding the machining range of CNC automatic lathes.
    Improved basic performance, along with great advances in ease of use.

    Improved basic performance

    • B-axis tools expand the machining range for the front spindle to 110°. This allows more complex machining with higher accuracy.
    • The number of turning tools is increased to six, resolving tool shortages.
    • Thermal dimension changes reduced through thermal analysis. This enables continuous machining with stable accuracy.

    Ease of use

    • The flip-up cutting room door provides a wide opening, and together with the door at the rear of the machine, allows easy access for tool setting.
    • The coolant tank has been improved for easier chip cleaning.
    • The tool pitches of the opposite tool post and back tool post have been widened to facilitate tool setting and reduce setup time.
    • The operation panel has a large 15-inch touch panel. The new HMI (Human Machine Interface) allows intuitive operation.

    Improved Productivity

    • The latest NC unit on the machine realizes simultaneous 5-axis control. Cycle times are shortened due to improved program processing capability.
    • The higher output of the back spindle improves acceleration/deceleration, which helps to shorten cycle times.
    • LFV can now be used for back machining, eliminating problems with chip entanglement.
    • The IoTFriendly function incorporated in the machine enables configuration of an operation monitoring system using communication standards compliant with OPC-UA and MTConnect.
    • The available peripheral units include motor-driven knock-out devices, loaders/unloaders, ATC units, and servo-driven chucking devices.

    Preowned Citizen A32-VII 7 Axis CNC Sliding Headstock Turning Centre

    Rent from
    £3,500
    Serial Number: V14151
    Year of Manufacture: 2009
    First Installed: July 2010

    Accessories:
    Iemca Boss 332/37 Magazine Barfeed
    Workpiece Conveyor
    Swarf Conveyor
    Absolent Mist Extraction
    P&E CM20-2000 6-line HPC Unit
    Fire Extinguisher

     

    Preowned Citizen L20-VII 7 Axis CNC Sliding Headstock Turning Centre

    Rent from
    £3,000
    Serial Number: E3938
    Year of Manufacture: 2004
    First Installed: November 2004

    Accessories:
    Iemca Boss 332/37 Magazine Barfeed
    Workpiece Conveyor
    Swarf Conveyor
    Absolent Mist Extraction
    Fire Extinguisher

     

    Preowned Citizen L20-VII 7 Axis CNC Sliding Headstock Turning Centre

    Rent from
    £3,000
    Serial Number: E3543
    Year of Manufacture: 1998
    First Installed: October 1998

    Accessories:
    LNS Mini Sprint 320/37 Magazine Barfeed
    Workpiece Conveyor
    Swarf Conveyor
    Filtermist Extraction
    Fire Extinguisher

     

    Preowned Citizen M332-V 14 Axis CNC Sliding Headstock Turning Centre

    Rent from
    £3,500
    Serial Number: P16458
    Year of Manufacture: 2008
    First Installed: July 2008

    Accessories:
    Iemca Boss 332/37 Magazine Barfeed
    U35J Work Unloading Unit
    Swarf Conveyor & Bin
    Fire Extinguisher
    Coolblaster 5-line HPC Unit
    Absolent Mist Extraction
    Good Selection of Turret Tool Holders

     

    L20 XII B5 LFV

    Sliding Headstock Type Automatic CNC Lathe

    The L20 XIIB5 finally enables simultaneous 5-axis control, greatly expanding the machining range of CNC automatic lathes. Improved basic performance, along with great advances in ease of use.

    Improved basic performance

    • B-axis tools expand the machining range for the front spindle to 110°. This allows more complex machining with higher accuracy
    • The number of turning tools is increased to six, resolving tool shortages.
    • Thermal dimension changes reduced through thermal analysis. This enables continuous machining with stable accuracy.

    Improved Productivity

    • The latest NC unit on the machine realizes simultaneous 5-axis control. Cycle times are shortened due to improved program processing capability.
    • The higher output of the back spindle improves acceleration/ deceleration, which helps to shorten cycle times.
    • LFV can now be used for back machining, eliminating problems with chip entanglement.
    • The IoTFriendly function incorporated in the machine enables configuration of an operation monitoring system using communication standards compliant with OPC-UA and MTConnect.
    • The available peripheral units include motor-driven knock- out devices, loaders/unloaders, ATC units, and servo-driven chucking devices.

    L20 XII ATC

    We have developed a B-axis ATC (Automatic Tool Changer) while keeping the operability of the best-selling L20 machine unchanged.

    Citizen’s unique, compactly designed ATC tooling with B-axis can be mounted on the gang tool post to enable use of a total of 13 front machining B-axis tools, comprising 12 ATC tools and one tool built into the tooling. (L20XII dedicated option).

    • With the L20’s operability unchanged, using the ATC tooling in conjunction with existing turning tools and cross machining rotary tools combines the machining speed of a Swiss-type automatic lathe thanks to the gang tool post. With the versatility of a B-axis turning center equipped with an ATC.
    • The capability for machining complex parts like medical parts including implants, the ATC provides an environment where the tool setting for machining several types of workpieces can be completed in a single setup.
    • B-axis machining, the ATC tooling can also be used in a wide range of applications such as those with a lot of cross/ end face machining, utilizing a wealth of tool variations including slitting/hobbing.

    Preowned Cincom Series 5 L20-VII CNC Sliding Headstock Turning Centre

    Rent from
    £3,000
    Serial Number: Q12005
    Year of Manufacture: 2001
    First Installed: January 2001

    Accessories:
    Iemca Boss 432/37 Magazine Barfeed
    Workpiece Conveyor
    Automatic Fire Extinguisher
    GSX510 End face driven spindle (double ended)
    Mist Extraction

     

    New TECH

    DISCOVER WHATS NEW

    Discover

    #CitizenStory

    Share with us your Citizen Story